Testinside cisco CCNA 640-816

Interconnecting Cisco Networking Devices Part 2 : 640-816 Exam

640-816 ICND2
Interconnecting Cisco Networking Devices Part 2

Exam Number: 640-816 ICND2
Associated Certifications: CCNA
Duration: 75 minutes (45-55 questions)
Available Languages: English
Click Here to Register: Pearson VUE
Exam Policies: Read current policies and requirements
Exam Tutorial: Review type of exam questions

Exam Description Exam Topics Recommended Training Additional Resources
Exam Description
The 640-816 Interconnecting Cisco Networking Devices Part 2 (ICND2) is the exam associated with the Cisco Certified Network Associate certification. Candidates can prepare for this exam by taking the Interconnecting Cisco Networking Devices Part 2 (ICND2) v1.0 course. This exam tests a candidate’s knowledge and skills required to successfully install, operate, and troubleshoot a small to medium size enterprise branch network. The exam covers topics on VLSM and IPv6 addressing; extending switched networks with VLANs; configuring, verifying and troubleshooting VLANs; the VTP, RSTP, OSPF and EIGRP protocols; determining IP routes; managing IP traffic with access lists; NAT and DHCP; establishing point-to- point connections; and establishing Frame Relay connections.

Exam Topics
The following topics are general guidelines for the content likely to be included on the Interconnecting Cisco Networking Devices Part 2 exam. However, other related topics may also appear on any specific delivery of the exam. In order to better reflect the contents of the exam and for clarity purposes, the guidelines below may change at any time without notice.

Configure, verify and troubleshoot a switch with VLANs and interswitch communications
Describe enhanced switching technologies (including: VTP, RSTP, VLAN, PVSTP, 802.1q)
Describe how VLANs create logically separate networks and the need for routing between them
Configure, verify, and troubleshoot VLANs
Configure, verify, and troubleshoot trunking on Cisco switches
Configure, verify, and troubleshoot interVLAN routing
Configure, verify, and troubleshoot VTP
Configure, verify, and troubleshoot RSTP operation
Interpret the output of various show and debug commands to verify the operational status of a Cisco switched network
Implement basic switch security (including: port security, unassigned ports, trunk access, etc.)
Implement an IP addressing scheme and IP Services to meet network requirements in a medium-size Enterprise branch office network
Calculate and apply a VLSM IP addressing design to a network
Determine the appropriate classless addressing scheme using VLSM and summarization to satisfy addressing requirements in a LAN/WAN environment
Describe the technological requirements for running IPv6 (including: protocols, dual stack, tunneling, etc)
Describe IPv6 addresses
Identify and correct common problems associated with IP addressing and host configurations
Configure and troubleshoot basic operation and routing on Cisco devices
Compare and contrast methods of routing and routing protocols
Configure, verify and troubleshoot OSPF
Configure, verify and troubleshoot EIGRP
Verify configuration and connectivity using ping, traceroute, and telnet or SSH
Troubleshoot routing implementation issues
Verify router hardware and software operation using SHOW & DEBUG commands
Implement basic router security
Implement, verify, and troubleshoot NAT and ACLs in a medium-size Enterprise branch office network.
Describe the purpose and types of access control lists
Configure and apply access control lists based on network filtering requirements
Configure and apply an access control list to limit telnet and SSH access to the router
Verify and monitor ACL’s in a network environment
Troubleshoot ACL implementation issues
Explain the basic operation of NAT
Configure Network Address Translation for given network requirements using CLI
Troubleshoot NAT implementation issues
Implement and verify WAN links
Configure and verify Frame Relay on Cisco routers
Troubleshoot WAN implementation issues
Describe VPN technology (including: importance, benefits, role, impact, components)
Configure and vary PPP connection between Cisco routers

“Interconnecting Cisco Networking Devices Part 2″, also known as 640-816 exam, is a Cisco certification.
Preparing for the 640-816 exam? Searching 640-816 Test Questions, 640-816 Practice Exam, 640-816 Dumps?

Free 640-816 Demo Download
TestInside offers free demo for 640-816 exam ( Interconnecting Cisco Networking Devices Part 2). You can check out the interface, question quality and usability of our practice exams before you decide to buy it. We are the only one site can offer demo for almost all products.

QUESTION 21:
Exhibit:
Based on the output from the show spanning-tree command shown, what can be
determined about the switch configuration? (Choose two.)
A. This switch is the root bridge for VLA.N 1
B. The 802.1d protocol is enabled on the switch
C. This switch is connected to port 17 on the root bridge
D. The switches are using Rapid Spanning Tree Protocol
E. Port 17 is the root port and port 23 is the redundant link
Answer: B, E
The answer shows that the bridge output is the root bridge for VLAN 1. If that were the
case, then there would be no blocked ports for this output. Also, the Root ID and Bridge
ID would have the same Address.
QUESTION 22:
Exhibit:

Based on the information shown above, what can be determined from the output
shown?
A. The Certkiller 1 switch is using VTP.
B. This is the only switch in the LAN topology.
C. The Certkiller 1 switch is not the root switch.
D. The link to the root bridge is through a 1 Gbps connection.
E. Spanning Tree Protocol is disabled on the Certkiller 1 switch.
Answer: C
Explanation:
The root ID of the switch is the default root ID assigned to all Cisco switches, in order to
force this switch to become the Root switch you may issue the spanning-tree vlan 1
priority [0-61440 in increments of 4096] command.
QUESTION 23:
What is the purpose of the Spanning Tree Protocol (STP)?
A. To prevent routing loops
B. To create a default route
C. To provide multiple gateways for hosts
D. To maintain a loop-free Layer 2 network topology
E. To enhance the functions of SNMP
Answer: D

Testinside CCNA 640-816 Questions and Answers : 204 Q&As
Updated: October 15th , 2008
Price: $125.99 $99.99

Free download：pass4sure CCNA 640-816
Free download：testking CCNA 640-816
password : www.ciscoexams.org